160W Poly Solar Panel
Rated power: 160W
Short circuit current (Isc): 9.87A
Working current (Iop): 8.89A
Temperature range: -40℃~+80℃
Frame: Heavy duty aluminum
Kind of glass and its thickness: Low Iron, high transparency tempered glass of 3.2mm
SLA Battery Voltage: 12V
Warranty: 90% within 10 years and 80% with 25 years
20A 12V/24V Auto Switch LCD Intelligent Charge Controller
Rated charge current: 10A, 20A
Rated discharge current: 10A, 20A
USB Output voltage: 5V
Total USB output current: 3A
DC output voltage: 12V
Total DC output current: 2A
Short circuit recovery time: 10s
Open circuit voltage of solar panel: 40V
No load loss: 0.05W
Over voltage protection: 15V; X2/24V
Float charge voltage: 14V; X2/24V
Discharge recovery voltage: 12V; X2/24V
Over discharge voltage: 10.5V; X2/24V
Control mode: Software intelligent control
Working temperature: -35℃~+55℃
1. Over-load protection
2. Short circuit protection
3. Lightning protection
4. Under-voltage protection
5. Over-charging protection
6. Reverse Polarity protection
1. 4 x 160W 18V poly solar panel with MC4 connector
2. 4 x 4 Z style mounting kit
3. 1 x 20A 12V/24V auto switch LCD intelligent regulator charger controller
4. 1 x16ft 12AWG Extension Solar Cable with MC4 Connector (1pc 16ft Red and 1pc 16ft Black)
5. 2 pair Y MC4 solar cable connectorPerfect 24V (wired in series) off grid solar power kit for 24V battery charging.
High-efficiency silicon solar cells ensure high performance of solar modules and create maximum power output. 25-year transferable power output warranty: 5-year/95% efficiency rate, 10-year/90% efficiency rate, 25-year/80% efficiency rate.
Easy to install with Z brackets for mounting, 2 pair Y MC4 solar cable connector, 1pc 16ft Red and 1pc 16ft Black solar cable for connecting PV array to the charge controller conveniently. Each solar panel comes with 1 pair of 35 inches cables with MC4 Male/Female connectors for quickly setting up.
Correct connection order: please FIRSTLY connect your battery to Battery terminals of charge controller, then connect your load to Load terminals of controller (if no load, pls ignore this step), lastly connect the PV (solar) array to Solar terminals of controller.
By-pass diodes are pre-installed in waterproof IP-65 rated juncton box to minimize power drop caused by shade and ensure excellent performance in low-light environments. Corrosion-resistant aluminum frame for extended outdoor use, allowing the solar panels to last for decades as well as withstand high winds (2400Pa) and snow loads (5400Pa).