Features: -Graphical display of historical energy consumption with Time and Date information. -Two years of historical data storage. -Single and dual tariff rates to show savings. -One, two and three phase support. -Set the monitor for 240VAC for most of the solar installations and clamp the sensor (included) over one of the electrical line. Only one clamp sensor needed. Note of Installation: 1. This is for AC power monitoring from solar and wind inverter or AC power from generator. 2. If it is 240V AC, put one clamp around only one line wire (240V has two line wires, use any one. Both wires have same current). 3. Set “MODE” on top right to 240V. 4. For 120V AC output, follow step 2 & 3 and set 120V. 5. The monitor is based on eddy current and so there may be small variation in reading. 6. We sell the same unit with two clamps as “Wireless Home Power Electric Meter”. This system can be used to monitor the power consumption of the house with extra clamp. Email us for additional clamp or for any question.Solar Power Monitor, AC Output power Inverter – Realtime Generation in KW, Records Data
Displays Cumulative Electricity Production: Hour / Day /Week /Month /Year /Total
Wirelessly Monitor your solar generation from inside your home – put in in kichen or living room
Also, works with wind or any generators. Put the sensor clamp round the line wire (generally of black or red color wire), not around neutral (white).
Only One Clamp needed for 120V AC or 240VAC