What’s Best for Your Solar Lights and Garden Products This Winter?

Most {solar lights} products survive the winter just fine as long as you keep shovels, snow blowers and chemicals away from them. Others, however, really should be taken inside. This article reviews what should come in and how to store them properly, and what how to take care of {solar lights} lights that will stay out for the winter.

Products to Take for Protection against Freezing Weather

Water Features

If you live in areas that experience freezing temperatures, you really need to take in most {solar lights} water features: pumps, fountains and combination bird bath/fountains.

The reason is simple: when water freezes, it expands and regardless of the quality of the pump, damage can occur.

There are exceptions: if you have pumps in ponds deep enough so that freezing is rare, you should be okay. And, if you have fish or other fauna in the ponds, you probably will need the pumps to maintain the animals’ health over the winter. However, decorative water features should certainly be taken in, especially those that float on top of the pond.

While all ceramic water features should be taken in (bird baths, fountains, etc.) since the porous material will absorb moisture and cracking (we lost one of our favorite bird baths this way), not all fountains need to come in.

If you don’t have a place to store them inside, or if they are inconvenient to move, just drain the water out and check the item after rain or snow melts to make sure that none of nature’s water pools in the basin or the reservoir.

Delicate Glass {solar lights}

This year, we sold a lot of real glass decorative solar accent lights.While many of them are a lot more attractive than acrylic alternatives, they also are more delicate and often the glass is not very thick.We recommend taking these in to protect them, so that ice expansion or sheer cold won’t cause cracking or breakage.

Products to Take for Protection against Snow Shovels, Blowers or Plows

Many {solar lights} from ground-mounted spotlights to decorative items can stay out, as long as they are in locations where there is little chance of them being hit when snow is being removed.

This is especially true for walkway lights and solar mole chasers. Not only can snow removal put them at risk, but ice melting chemicals also can cause damage to the {solar lights}. And, while most are extremely resistant to water from nature, the corrosive nature of salt and other chemicals means that they can seep in to the body of the fixture and damage interior components, such as circuitry.

What Can Stay Outside Year-Round

Solar lamps and lamp posts, security lights and light strings that are a couple of feet or more above the ground are fine to leave out. These are made to withstand the weather and as long as you clean the snow off carefully (see below), they won’t be damaged. Solar lamps and lamp posts, except for portable ones, can’t be removed easily. If you are really concerned about damage, you can remove the lamp and keep it inside for the winter, but it’s not necessary.

Same thing goes for {solar lights} and flood lights. Ground-staked models that could be damaged by ice or snow removal should come in, but those above ground will be just fine. However, we do suggest that for best performance you position the {solar lights}, where possible, to get the most sun. This means positioning them in as upright position as possible towards where the sun shines the most during winter days.

Cleaning Snow and Ice off of {solar lights} and {solar lights}

It’s best to use a soft broom to remove snow off of panels. We use a duster with an extendable handle to clean snow off of our floodlights.

Ice is a bit trickier. If the ice is mostly translucent, the quality of light won’t be diminished very much and it’s best to leave it alone. If the ice is mixed with snow, do not try to chip it off of panels or fixtures. The risk of damage is just too high. Ditto for snow melting chemicals. As mentioned above, this is a sure-fire way to destroy the fixture and panels.

If a solar lamp or security light or its panels are covered by ice and you depend on the light for safety, take hot water and pour it over the ice. This should melt it enough so that you can push it off without any real force. If not, just pour more hot water until it can be easily wiped away.

Recharge {solar lights} Covered by Snow for More Than Three Days or So

If the {solar lights} is completely blocked by snow for a couple of days, there is a chance that the batteries have fully expended themselves.(Note: this usually won’t happen during cloudy weather, as the panel is likely to still store some charge.) Just like when lights are new, you’ll get the best performance and prolong the life of the batteries by turning the fixture off for two sunny days to let the battery store up a full charge. Then, when you turn the light back on, you’ll see the best performance in the short-and long-term.

Proper Storage of {solar lights} Taken Inside

If you are taking solar water features, decorative lights or walkway lights inside for the winter, the most important thing to do is to remove the batteries. While the risk of the batteries leaking is small, leaking batteries can ruin items.

Take the batteries out and put a number on each fixture (we use masking tape or medical tape) and then put the batteries into an envelope with a matching number. This is important because products should use the same strength and type of batteries that either came with the item or were specified in the instructions.Using the wrong type (even NiCad or NIMH batteries, but particularly lithium ion batteries) and strength isn’t smart. Interchanging the strengths of NICAD or NIMH batteries is possible for some products, but it’s really not a good idea.

Remember: the best battery is the one that your product was designed to use. Using the wrong type or strength of battery not only may destroy the product, it will void the product warranty. Unfortunately, we get warnings from our manufacturers each spring about t his issue.

Some people think they can try to use whatever battery is handy, but trust us: the manufacturers can tell if the product was damaged by the wrong type of battery. The result: the claim is denied and any money that the customer spends to send the product to the manufacturer will be lost.

By following these tips, you can be sure that the lights you keep outside during winter will provide the best light possible and products stored will be ready to go come spring time.



Source by Anne McElroy

Solar & Wind EBooks
Share Button

Leave a Reply

Your email address will not be published. Required fields are marked *


Solar Power Generators