Ten-high 100W 200W 300W DC input 12V Portable Wind charge controller for DC Output Wind Turbine Generator | Solar & Wind Products; View Hundreds of Solar & Wind Products Here!

Ten-high 100W 200W 300W DC input 12V Portable Wind charge controller for DC Output Wind Turbine Generator

Solar & Wind EBooks



buy now

$50.00



Product performance:

1.This controller can control wind turbines for automatic charging battery. Under the condition of the battery is full of, through internal automatic control circuit to make the brakes, when the battery voltage drops to the recovery voltage, wind turbine back for battery charging, so as to protect the wind turbine and battery.

2.Comprehensive waterproof protection. This controller USES the seal completely waterproof design, all of them, and don’t have to worry about air humidity, salinity, such as ground water use environment, protection grade reaches the IP67 above, even in water can normal use for a long time, improve the reliability greatly.

Mode of connection:

1.Respectively connected to the battery “+” and “-” to the battery positive and negative terminal of the controller.

2.Respectively connect wind generators rectifier output anode and cathode side to the Wind Turbine input anode and cathode terminal of the controller.

Note:

1.Confirm the rating of the wind generator output voltage and battery voltage consistent.

2.Wiring in in strict accordance with the order, first connect the anode and cathode of the battery, then the Wind Turbine rectifier output anode and cathode side.

For Wind Power Generator,12V Voltage grade,300W Rated power
Control wind turbines for automatic charging battery. Under the condition of the battery is full of, through internal automatic control circuit to make the brakes, when the battery voltage drops to the recovery voltage, wind turbine back for battery charging, so as to protect the wind turbine and battery.
Initial brakes voltage: 15V, Brake recovery voltage: 13.5V
Comprehensive waterproof protection. This controller USES the seal completely waterproof design, all of them, and don’t have to worry about air humidity, salinity, such as ground water use environment, protection grade reaches the IP67 above, even in water can normal use for a long time, improve the reliability greatly.
For wind turbine: ≤300W,IP Grade: IP67,Working Temperature: -35~+75℃

Share Button

Leave a Reply

Your email address will not be published. Required fields are marked *


Energy Controllers

  • Recent Posts

  • Bring Your Old Battery Back to Life!


    Learn how to bring any battery back to life again



    Learn how to bring any battery back to life again


    Learn how to bring any battery back to life again




    Learn how to bring any battery back to life again

    Solar Generators



    Learn how to bring any battery back to life again

    Solar Converters



    Learn how to bring any battery back to life again

    Wind Turbine Power


    Wind Power Kits


    Aquaponics


  • Recent Comments


  • Learn how to bring any battery back to life again

    Solar Generators


    Solar Converters


    Wind Turbine Power


    Wind Power Kits


    Aquaponics



    Learn how to bring any battery back to life again


    Solar Converters


    Wind Turbine Power


    Wind Power Kits



    Learn how to bring any battery back to life again

    Aquaponics


  • Archives

  • solar power products