SUNGOLDPOWER New Waterproof 100W 200W 300W 400W 12V DC Wind Charge Controller Wind Turbine Wind Generator
PLEASE READ THESE INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION OR OPERATION OF THIS PRODUCT.
1.1 Please make sure the output voltage of wind generator is consistent with rated battery voltage.
1.2 Please connect the cables of plus-n-minus of battery firstly and then connect the three cables of wind generator.
1.3 Please make sure you connect battery and wind generator with controller according to this instruction, opposite polarity or wrong position connection will result in abnormal operation of system or damage of system components.
2.1 Connect the “+” and “-“of battery with battery plus-n-minus input terminals of controller.
2.2 Connect the cables of wind generator with voltage input terminals of wind generator of controller.
3.1 When battery light (green) is on, it indicates battery connection is normal.
3.2 When wind generator light (green) is on, it indicates wind generator connection is normal and it shows the rotation speed of wind generator by twinkle speed.
3.3 When brake light (red) is on, it indicates controller is braking automatically due to battery full charged or over-current protection function operation of controller.
Rated Battery Voltage:12V
Rated Wind Generator Capacity(Min):100W
Rated Wind Generator Capacity(Max):400W
Wind Generator Braking Voltage:15V
Wind Generator Recover Voltage:13.5V
Wind Generator Braking Current:30A
Dimensions(L x W xH):100mm×87mm×28mm
Quiescent Current:≤20 mA
IP Protection Level:IP67