1.Directly connected to the solar panels (do not need to connect the battery)
2.AC 0 angle with high precision auto-detection
3.Synchronous High-frequency Modulation
4.Pure Sine Wave Output
5.Automatic Sensing Function Solar Luminosity
6.Power Automatically Locked (APL)
7.Maximum Power Point Tracking (MPPT)
8.Automatically Adapt To Different Load Power Factor
9.Constant Current, Constant Power
10. Automatically Shut Down When The Power Output Of a Fault
11. Current Limit Protection
12. Stack Multiple Machines
13. High-Frequency High Conversion Rate
14. Adapt high frequency converter, the output more efficient.
DC input limit:
1. Input voltage range: 10.5V to 28V
2. Solar Panel: Recommend using the power more than 30W and the standard voltage of 17.5V PV panel. Recommend using multiple solar panels. Solar panel in series will result in high-input voltage which will exceed the working voltage range of the inverter.
3. Wind turbine system: Rated voltage 24VDC, maximum voltage 28VDC.
1* Power inverter
1* 1.8m Standard AC wire
1. This inverter only work with solar panel.
2. Recommend Maximum DC input 4AWG cable capable of handling more than 50A of the cable size.
3.Optimal length of the DC input line 8M or less, long cable will allow solar panels to the inverter DC voltage drop caused by wear and tear.
Recommend use solar panels: 1250Wp
DC voltage range: Vpv 10.5V~28V DC
AC output power: 1000W
AC standard voltage range: 90V-140V AC
AC frequency range: 55Hz~63Hz