Hurricane Wind Power reviews permanent magnet alternator generator pma pmg internals | Solar & Wind Products; View Hundreds of Solar & Wind Products Here!

Hurricane Wind Power reviews permanent magnet alternator generator pma pmg internals

Solar & Wind EBooks



Hurricane Wind Power permanent magnet alternator internals VS the other guys pma pmg. In this video Tony from Hurricane wind Power reviews the internal parts of the permanent magnet alternators and permanent magnet generators in the hurricane Vector DIY wind turbine kit and Hurricane xp residential wind turbine kits available a http://hurricanewindpower.com
540-761-7799 call us today
http://www.hurricanewindpower.com/home-diy-wind-generator-kit-hurricane-vector-wind-turbine-1000-watt-24-volt
http://www.hurricanewindpower.com/48-volt-residential-wind-turbine-kit/
for the best of both world check out hurricane synthesis solar panels
http://www.hurricanewindpower.com/synthesis-power-100-watt-solar-panel-multi-crystaline-off-grid-boat-and-rv/
Check us out on facebook
https://www.facebook.com/pages/HurricaneWindPowercom/146553008723813?v=wall

source

Share Button

22 Comments on "Hurricane Wind Power reviews permanent magnet alternator generator pma pmg internals"

  1. Nice and to the point video, and a nice view of the different components, that make up a wind turbine in the small wind market. nice to see what a real 1.5kw stator looks like compared to a stator that other companies clam anywhere from 1600 watts up to 1800 watts and some 2kw. when we know what they will and will not product. The white lighting looks like a solid and nice turbine. and your tail arms look nothing like the other company's The tail end of the tail arm is strait , were as the other guys is not and is triangle to the end.

  2. Missy T says:

    OK, you said the one in the middle is a 2kw? Thats 2000 watts right? But is smaller with smaller blades than the bigger one thats 10 lbs with much bigger blades which makes 1000 watts. Looks like you just busted a scam for sure.

  3. Missy T says:

    We have your little red permanent GM alternator on our stream wheel and are very happy with it. It was difficult to find a huge belt or the wheel pulley to put on it but after 3 years it only had to have new bearings once this summer but it runs everyday all day and makes 18 to 20 amps constantly unless the creek gets junk in it and blocks the water wheel. Why does your last so much longer that the Missouri wind & solar one we had, it sounded like a helicopter but only lasted 3 months and its magnets came apart in it. Yours is so quiet we love it.

  4. Lets dispel the crap about car alternators in any variation whether from Mexico or Vietnam since NONE are made in the USA.
    For one, a belt tensioner on a car is 12 to 30 lbs and it don't hammer on the bearings like a typical unbalanced set of raptor blades can do.
    Alternators on a car actually get much less rotating service than a wind turbine by a huge margin. Drive your car 24 hours a day with the hood open to all elements and your car alternator will be shot in under 4 months.
    A PMG is a Permanent magnet generator that with or without brushes produces a single line of voltage, not alternating.
    A PMA is a Permanent magnet alternator that can be made out of anything, including a Shou Dan Pong washing machine casing or a delco alternator.
    A Axial Flux is a recurring Multi phase PMA
    A treadmill motor is a PMG if used to make and not use power.

    Hope this helps correct the damage made by a prolific fraud from Missouri, even if the Meat Puppets he uses to deceive the world have no concept on reality.

  5. It is my intent to show the differences as some of you folks who argue and do not have the components in front of you to make an informed decision can see the difference. As I read through some of these comments it is apparent to me that no one seems to care and are not open minded to say the least. If your closed minded and want to fight do it elsewhere. Discussion and intellectual respectful debate encouraged….company names being used, name calling is discouraged at
    the same time thanks for you visits

    We are not selling a car alternator and we are selling a wind turbine. While we have those and they have their place people some of us want more power and in lower winds. We are using real small wind certification data standards. You know the kind that people in the industry use. So if anyone wants to put there 2 kw turbine in a certification head to head with us and sign a document to publish the results on YOU TUBE of the testing in a real testing calibrated facility that would settle a lot of arguments. Of course the XP already is CE listed.

     I have shown commonalities of the 17 mm shaft small bearings and tiny windings. 14 poles and 42 coils 3 phase. It takes 14 of those little coils just to get the voltage in series to the cut in point. If you guys are happy with hoisting car parts on a pole and are happy with the results who am I to stand in the way. If you have the time money and technical ability build an axial go for it. If you want to get a good value of the shelf that will last we are a great choice. If you want to continue to believe that a 12 lb alternator with 5 tiny 28 inch blades will power your place and you are happy with that keep doing it guys! If you want to go in another direction we took a right at that intersection a year ago.

  6. i had to comment , this turbine of yours represents TRUE value for money and built to a standard ive hoped for, for some time, ive no time for the games and i can clearly see neither do you, keep up the good work.

  7. Excellent comparison of the different parts used.  You know I had that other companies wind turbine installed and just a little over a year of flying it I had problems with the front bearing sticking at the 1 o'clock position. and that is with there Falcon Mac 5 80 inch blades.  Have you considered making blades up to say 50 inches?  that would give you more surface area.  also , when I built my first 3 phase axial, I built another set of rotors and increased the magnet strength on that set by 30 pound pull and the output jumped a lot.  small up grades should improve over all performance. might be interesting to see how much more power you could possibly make.  again, nice video showing the difference , especially there none coated stators. SD

  8. ian57812 says:

    My only concern on the white lighting rotor is diameter of the magnets is this not more of a design for a electric motors ratherthan a wind generator. I found the greater the distance the magnets turn on a Axial flux across the coils the more current can be generated you only have to look at Orlans design to see this. Hope I am making sence . Interesting demo

  9. Thank you for this educational video

  10. would that produce well in low wind area's

  11. been doing some home work on some pma's that could be use in Philadelphia pa. and stumble on your videos that explain more info than others..

  12. We have your turbine and have owned some from other companies as well and there is no comparing the units. The vector wind turbine is very well built good work

  13. ilya 213 says:

    I have been watching the small wind turbine war on youtube and do not see your wind turbine output from a lot of customers. why?

  14. вася says:

    I watched your put put video on the white lightning compared to the freedom wind pmg and it crushes it why not show them head to head?

  15. I watched your put put video on the white lightning compared to the freedom wind pmg and it crushes it why not show them head to head?

  16. Good job glad to see the differences in the products

  17. Darry Boyd says:

    It is great to see the real difference in what goes into these products. Frankly I find it hard to be believe anything anyone in small wind says so seeing is believing and that stator core is massive.

  18. iren asasin says:

    So why did you dump the made in usa completely?

  19. we are looking at a turbine for our 12 volt off grid system what do you recommend?

  20. Sumera Saeed says:

    We are glad we went with your MPPT charge control great low wind power output and the high wind control and output make a difference we can see in the operation of the machine

  21. Poppiy says:

    I can see why this makes the power you say it does good job.

  22. Jack Ryan says:

    Why does 123 people have a problem with the video?

Leave a Reply

Your email address will not be published. Required fields are marked *


Energy Controllers

  • Recent Posts

  • Bring Your Old Battery Back to Life!


    Learn how to bring any battery back to life again



    Learn how to bring any battery back to life again


    Learn how to bring any battery back to life again




    Learn how to bring any battery back to life again

    Solar Generators



    Learn how to bring any battery back to life again

    Solar Converters



    Learn how to bring any battery back to life again

    Wind Turbine Power


    Wind Power Kits


    Aquaponics


  • Recent Comments


  • Learn how to bring any battery back to life again

    Solar Generators


    Solar Converters


    Wind Turbine Power


    Wind Power Kits


    Aquaponics



    Learn how to bring any battery back to life again


    Solar Converters


    Wind Turbine Power


    Wind Power Kits



    Learn how to bring any battery back to life again

    Aquaponics


  • Archives

  • solar power products