ECO-WORTHY 1000W 1KW Monocrystalline 24 Volt Off Grid Solar Panel Kit with 45A PWM Charge Controller | Solar & Wind Products; View Hundreds of Solar & Wind Products Here!

ECO-WORTHY 1000W 1KW Monocrystalline 24 Volt Off Grid Solar Panel Kit with 45A PWM Charge Controller

buy now


160W Mono {solar lights} Module
Output Power: 160 Watts
Nominal Voltage: 18 Volts
Maximum/Peak Voltage(Vmp): 21.2 Volts
Open Circuit Voltage(Voc): 22.41 Volts
Maximum/Peak Current(Imp): 8.89 Amps
Short Circuit Current(Isc): 9.76 Amps
{solar lights} Cell Type: Mono-Crystalline
{solar lights} Cell Size: 156*156mm
{solar lights} Cell Quantity: 36 pcs
Frame Structure(Material): Heavy Duty Aluminum
Encapsulation: EVA
Warranty: 90% within 10 years and 80% with 25 years
Dimensions: 665*1452*35mm(26.16*57.3*1.37 in)

45A {solar lights} Charge Controller
Regulator with timer and light sensor
maximum charging curren : 45A
maximum loading current : 45A
Rated voltage : 12/24v
temperature compensation: -4.7mv/cell· °C
environment temperature :-20 °C ~ +50 °C
working tacitly approved : charge off voltage 13.8v/27.6v (±0.2)
load off voltage: 10.8v/21.6v (±0.2)
load on voltage: 12V / 24V (±0.2)

Package Include
6 x160W 18V mono {solar lights} with MC4 connector
6 x 4 Z style mounting kit
1 x 45A {solar lights} controller
1 pair MC4 with 5 meter 4mm² extension {solar lights} cable (5m red and 5m black)
4 pair Y MC4 {solar lights} connectorComplete 24 volts off grid {solar lights} system kit. Package include 6pcs 160W Mono {solar lights} + 45A Charge Controller + {solar lights} Cable + MC4 Branch Connectors Pair + Z Brackets Mounting.
Correct connection order: please FIRSTLY connect your 24 volts battery pack to the 45A charge controller, then connect controller to load (if no load, pls ignore this step), lastly connect controller to PV ({solar lights}) array.
The 45A charge controller has 3 pairs of 2 terminals: Solar, Battery and Load. Please connect your battery to Battery terminals, your DC loads to the Load terminals, and your PV array to the Solar terminals.
Easy to install with Z brackets for mounting {solar lights}, 4 pairs Y MC4 Solar connector and 1 pair 16 feet black & red extension solar cable for connecting PV array to the charge controller conveniently. Each {solar lights} comes with 1 pair of 35 inches cables with MC4 Male/Female connectors for quickly setting up.
By-pass diodes are pre-installed in waterproof IP-65 rated juncton box to minimize power drop caused by shade and ensure excellent performance in low-light environments. Corrosion-resistant aluminum frame for extended outdoor use, allowing the {solar lights} to last for decades as well as withstand high winds (2400Pa) and snow loads (5400Pa).

Solar & Wind EBooks
Share Button

Leave a Reply

Your email address will not be published. Required fields are marked *

Solar Power Generators