1byone Wireless Home Security Driveway Alarm, 1 Plug-in Receiver and 1 PIR Motion Sensor Detector Weatherproof Alert System Kit, 36 Melodies to choose | Solar & Wind Products; View Hundreds of Solar & Wind Products Here!

1byone Wireless Home Security Driveway Alarm, 1 Plug-in Receiver and 1 PIR Motion Sensor Detector Weatherproof Alert System Kit, 36 Melodies to choose

Solar & Wind EBooks



buy now

$26.99

1byone Wireless Household Alert Security System is an easy-to-install and DIY home security system, which is perfect for your office, apartment or home. Just rest in absolute easy!
To avoid false alarms:
1. Mount the sensor away from direct sunlight, such as under an overhang, covered area, or in a non-metal box.
2. It might be helpful (if you haven’t tried yet) to move and mount the sensor in a higher position, then angle the sensor down to face the driveway. This may hopefully reduce the interference from objects in the distance and from sunlight.
3. Lastly, if none of these suggestions help, try tapping over a little of the sensor area with black tape as this may reduce sensor sensitivity.
Before using this product please note that there is a on/off switch at the side of the receiver, be sure to switch the button to the “ON” position when using the alarm kit. also need to check the power supply for the receiver and sensor are working properly. If the product has out of power, they need Re-pairing the function.
Specification:
Power Supply (Receiver): AC 110-120V 60Hz
Power Supply (PIR Sensor): 3 x 1.5V AAA batteries (not included)
PIR Sensor Detecting range: 5 – 8 m / 16 – 26 ft
Communication range: 100m / 300ft (IN THE OPEN AIR)
Weather resistant of PIR Sensor: IP44
Ring Volume of Receiver: 80dB ( within 0.5 m / 1.5ft )
Box Contents:
1 x Receiver
1 x PIR Sensor
1 x Wall Plug
1 x Screw
1 x Instruction ManualReliable Range – Communication range of up to 100m/328ft (the distance from the sensors to the receiver In THE OPEN AIR) and detection range of the infrared sensor of approximately 5-8m/16-26ft to effectively keep you alerted.
Different Ringtones – The receiver is a doorbell design with 36 different ringtones for personal preferences.
User-Friendly – There are 3 mode choices (Sound/LED Flash/Sound and LED Flash) and 3 levels volume adjustment (High/ Middle/Low ) from 25-80dB.
PIR Technology – Our sensor uses state-of-the-art passive-infrared (PIR) sensor to detect any movement within the detection range. Perfect for long or hidden driveways and allows you a fore warning when guests (or intruders) are approaching.
Expandable & DIY: 1 receiver can pair up to 5 PIR sensors and 1 PIR sensor can pair with multiple receivers. If you have more than one driveway or area you would like to monitor, just DIY and fulfill your needs.

Share Button

Leave a Reply

Your email address will not be published. Required fields are marked *


Energy Controllers

  • Recent Posts

  • Bring Your Old Battery Back to Life!


    Learn how to bring any battery back to life again



    Learn how to bring any battery back to life again


    Learn how to bring any battery back to life again




    Learn how to bring any battery back to life again

    Solar Generators



    Learn how to bring any battery back to life again

    Solar Converters



    Learn how to bring any battery back to life again

    Wind Turbine Power


    Wind Power Kits


    Aquaponics


  • Recent Comments


  • Learn how to bring any battery back to life again

    Solar Generators


    Solar Converters


    Wind Turbine Power


    Wind Power Kits


    Aquaponics



    Learn how to bring any battery back to life again


    Solar Converters


    Wind Turbine Power


    Wind Power Kits



    Learn how to bring any battery back to life again

    Aquaponics


  • Archives

  • solar power products